Global Energy Technologies, has designed the next generation of powerful, efficient implosion engines and pumping systems.

We call this revolutionary engine, a "thermodynamic transformer" or BDT as this is a more proper name for the device; the Tesla, Bladeless Boundary Disk Turbine - was originally developed in the early 1900's. These engines, powered by compressed air, powered by steam, or any combustible fuel, such as methane, natural gas, propane, gasoline, diesel, or hydrogen, or even flowing water from rivers or from an ocean's tides, offer an incredible advantage over conventional IC engines. They are inexpensive, extremely efficient, require virtually no maintenance, and will run in environments where other engines, would, quite simply - fail. The Tesla Turbine and Tesla Pump function on the principles of adhesion and viscosity, or boundary layer drag. The Tesla Turbine itself, is a very simple device, consisting of basically, a number of very thin disks, mounted on a shaft, with their centers cut out in sections...this assembly is then enclosed in an air tight case. Pure simplicity.

Such a machine is a thermodynamic transformer of an activity surpassing, by far, that of any other prime mover, it being demonstrated in practice that each single disk (i.e. this is why it is called bladeless) of the rotor is capable of performing as much work as a whole bucket-wheel of a conventional turbine. Besides, a number of other advantages, equally important, make it especially adapted for operation as an internal combustion motor. Please note: the turbine is nothing more than an efficient energy transformer - it is NOT an engine, in and of itself - it needs a form of motive impulse (power), i.e. steam or pressure and velocity from a combustion source - to operate.

With our Thermodynamic Transformer (BDT) engine design, our  Tesla/Schauberger type Pumping system - the Centrifugal Molecular Implosion Turbine ® (CMIT) ,  "Fresh-Cool®" Air conditioning and Heat-Pump Systems, and, our revolutionary InVAID® (Vortex Accelerated Implosion Drive) Systems , we are in a position to offer GLOBAL energy solutions. All of our systems use environmentally sensible and sustainable technology.

Applications and Systems

"Just what is your new invention?" I asked. "I have accomplished what mechanical engineers have been dreaming about ever since the invention of steam power," replied Dr. Tesla. "That is the perfect rotary engine..." Nikola Tesla, 1911

As anyone who reads today's headlines, or watches a Television newscast , one does not need to look far to realize that our Nation is in an immediate energy crisis. This is not only happening in the United States, but appears World-Wide. We have relied on outdated forms of prime movers and inefficient forms of power generation and supply for nearly a century. The technology, in the form of the original Tesla Bladeless Boundary Disk Turbine, was applicable in Tesla's time...it is not only beneficial, but may be critical to implement this technology in OUR time!

Everyone hears the buzzwords - decentralized power stations. I do not have the space here to amplify on the exact definition, however, it is quite probably the most cost effective solution to our current electrical energy situation. Small, efficient powerhouses-in-a-hat (the term coined by the media of Tesla's day for the Tesla Turbine) will be employed in towns, communities, groups of houses, and around large cities, augmenting the current Utilities power supply. We are in the enviable position of being quite able to assist end-consumers in this energy crisis.

The BDT engine has a weight to output horse power ratio of up to an unbelievable 10 HP per pound. It has the ability to run on almost any fuel. It is incredibly compact and lightweight. Pollution output from the exhaust of even the propane version is FAR below that of even today's best standard engines. The system also lends itself in use as an "air to air" refrigeration system without the need for harmful Freon gasses. The engine, by its very nature of operation is perfectly suited to Turbo/Electric applications. The BDT engine is unequaled in it's simplicity and output, far exceeding any other conventional engine to date. Where things really become interesting is when we combine the technology of the Tesla Turbine with that of Schauberger's Repulsine. Through our R&D and reverse-engineering of the Tesla Turbine, we noted several similarities to the historical archives regarding Schauberger's IMPLOSION engine - the Repulsine. Since our work began in this direction in 2001, I can state that an operational implosion engine can and will become a commercial application. The basic difference in design of the Repulsine, vs. that of the Tesla Turbine is the shape of the disk pack. Schauberger used a wavy plate format for his disks, whereas Tesla's disks were flat and smooth. Our work in this area has proven that Schauberger's implosion engine - the Repulsine, is capable of 227 times more power output when compared to the same size conventional Turbine. Why? IMPLOSION! Our work continues. This amazing engine is called - InVAID.

What may be the solution to our current energy crisis? Wave, hydro or rather - Ocean Power. Harnessing the power of the Earth's oceans is quite easily achieved. The benefits? A totally independent, inexhaustible power supply. The United States would be afforded complete energy independence, and be converted to a nearly 100% electrically driven economy. Totally non-polluting electrical energy, supplied directly from our coastline Ocean's waves. All of our factories - converted to electrical power. All of our automobiles and trucks and transportation - converted to clean, electric drive vehicles. All of our homes - converted to electric. Makes perfect sense. Does anyone reading this like the possibility of paying $5.00 per gallon for gasoline??? It's coming, so be prepared.

So what is the most sensible, most economical, and simplest way to overcome an oil driven, fossil fuel economy, and eliminate the stranglehold of mega-business oil industry??? Follow a few simple steps:

1.) Convert every town's and/or city's sewer treatment plants to a waste-to-energy electrical generation plant.

2.) Install water powered Schauberger-based vortex hydro-power plants on every major waterway and coastline in the United States. Again, clean, zero pollution electrical power generation.

3.) Buy a Tesla turbine powered COMPRESSED AIR CAR! What's coming out of the exhaust? AIR.

4.) Drink pure, clean, vortex energized WATER. If you are drinking any form of Municipal, treated water - you are hurting yourself !

5.) Start with your own HOME. At the very least, install a solar hot water heater. Better, convert most of your heating to passive solar (install a south-facing, glass wall - and use an insulated thick concrete slab for thermal retention).
If you have a fireplace or woodstove, start using fire-logs made from recycled waste material (they are now available at almost every large major retailer).
Plant some trees around your house, shade trees on the south facing side, and evergreens on the north side.
Start using recycled products, and, conversely, recycle everything.
Buy an electric car, or an air powered car, and ditch the fossil fuel sucking monster in your garage. Buy a bike, a trike, or start walking when you can.
Ditch the electric refrigerator and get a propane version, as they are roughly twice as efficient.
Switch all of your lights to the new LED lights, or at the very least, compact fluorescents.
Ditch the old tank hot water heater - buy a super-efficient INSTANT hot water heater.
Just doing these few things, nation wide, saves nearly half our current annual oil consumption...well, you get the picture.
Oh, and lest we all forget and start thinking greenhouse gasses are a man-made issue, let's put things in perspective. Over HALF of the greenhouse gasses currently being omitted on this planet are coming from FARM ANIMALS. Yes - cows (bovine, mainly), pigs, goats, chickens, etc...now shouldn't we consider utilizing this vast gas resource, as well?
Either that, or vegetarianism is starting to look pretty darn good. LOL.

Now it's all up to people that care. We've got zillionaire rock stars, movie stars, sports stars, and businessmen, all of whom could easily fund any of these projects with pocket change. The line starts at the front door.
Anyone with enough common sense, and the "guts" to do so - please feel free to contact us.

frankdgermano at gmail dot com

[Pictured Right: Arthur Bryant (local PA businessman & family friend), Julie Bertram (Representative; Smith Barney, Honesdale, PA) and Frank Germano, Scranton PA (Pres. Global Energy Technologies) at a recent AFA Gallery Art Review, Scranton, PA, Jan. 2006. Local showing of our good friend and associate - Charles G. Woods , AIA, award-winning architect, and now acclaimed local and national artist, while viewing his most recent artwork on display. Picture compliments; Scranton Times/Tribune. Click to enlarge picture.]

As our motto states: Got it yet? G.E.T. it!
I can't put it much simpler than that...

PRODUCT AVAILABILITY

Standard Engineering Fee for consultation :

Our engineering fees are $325.00 per hour per person. This fee is refundable if purchase of one of our products is made within 90 days of the request and the delivery of the requested unit. Contact one of us through email links below for a full description of the services offered. We can easily look at all commercial applications and review your presently installed systems and offer suggestions and/or improvements to the existing system. By incorporating our technology, a quite substantial improvement in efficiency as well as energy savings will almost definitely result.

Investor Information :

Contact frank germano or martin dorantes, directly. frankdgermano at gmail dot com, or martin_dorantes at hotmail dot com.

*As stated in many different locations on this site and webpage, all of our units are in the prototype stage! The cost for each of these units and systems is, therefore, based on applying our standard engineering fee ($325.00 per hour for design services) plus the individual cost of manufacture, shipping and installation.

** For qualified individuals and investors interested in making a commercial release feasible and profitable, please see below for further information.

"They are the most efficient, perfect rotary engines and pumps available today."

For the complete design history of our bladeless disk turbine's development, use this link -

Operational BDT units. This link features many of the bladeless disk turbines we have built, to date.

This Charlie turbine is now available, commercially, for $14,999.00 - contact me for details. This will be a complete, fully functional, commercial grade Tesla turbine -
frankdgermano at gmail dot com.