I have disassembled 2 old large hard drives that used 5" diameter platers, near perfectly flat and well balanced. Made of a lightweight aluminum alloy that I have not been able to find an accurate description of.

I thought they would be useful for building a motor from scratch, I have almost 80 half inch diameter N52 1/4" deep cylinder magnets that I was planning on arranging into 4-8 sectors of alternating poles. Main idea being that these large platter hard drives should be locatable (ebay) and smaller ~3-1/4" hard drive platters for up to 7200RPM are practically considered plentiful, if it's a feasible rotor for a motor generator it may possibly be the most economical way to recycle those platters, while building our devices.

I hope I'm not getting ahead I'm just getting ready for my motor generator build and thought maybe others would find it useful.

Peace,
matt

Attached Images

IMG_20120618_154619.jpg (1,002.0 KB, 6 views)

Hello Larry,

That is a nice approach Larry, I understand what you are doing, there is a guy (Troy Reed) that made some similar approach with pistons-crank shaft arrangement also...and He drove in a car that had that system.
The only problem of utilizing permanent magnets (PM) in any given design, is the fact that it can not be scaled up in a certain size and power in order to deliver certain torque and RPM's required by the application, besides the possible magnetic decay that occurs due to constant pulling energy from them...
Despite of that Reed made that car to work out great...but like all "Ends" to this too long lasting "Soap Opera", nothing ever happened after He got his patent granted...
My System works with and without PM, meaning all coils as Stators and Rotors.
I love permanent magnets, for small and midsize applications, including an electric car...but, they limit the system at certain point, no matter if they are Neo's...or other Rare Earth types.

The interesting point I had shown on some of my videos, and you guys that are replicating this coil set-up could verify it, is the fact that when the Coil is at Off stage, idling (T/Off at square wave), it reverses Voltage Polarity, as an Inductor does in a given board...but, it ALSO reverts "Naturally" its Magnetic Polarity, IF, and ONLY IF it is NOT "Disturbed"...now, taking advantage of this great natural response...it could assist our rotation, instead of opposing to it, creating magnetic drag, like it does on Motors-Generators belonging to the Symmetrical Systems.

Larry, of course I will help you to get your machine "tuned up" when I finish uploading my work!, count on it.
But I know you are going to like my systems also, as you will get to understand them completely well. And that will help you see your machine from a different point of view.

Regards


Ufopolitics

Hello Larry,

Ok, clearing out any "misunderstandings"...

I was referring to make it happen, as spreading it out to the world, to help me output and disburse this new technology, to help me get it to the right places...and once you understand it perfectly, to helps others to build them without my help. I am not going to be here "forever"...

Now, for your peace of mind, Larry...related to making it happen, as to build them and have the right results...I have already done it, made it and create them...and they are beautiful...


So relax and cheer up Larry...


Ufopolitics

" I work for the future and my contemporaries will not understand me , but one day scientific laws will prevail, laws of nature which secrets I have discovered,... and everything will change , like when you clap with your hands..."


"The Scientific man does not aim at an immediate result. He does not expect that his advanced ideas will be readily taken up. His work is like that of a planter-for the future. His duty is to lay foundation of those who are to come and point the way"

Nikola Tesla

Hello UFO
I too can share your vision... this is not something for some few to make a lot of money with, but to benefit mankind world wide. I intend to help others take advantage of your work for their private use and to get them to help others too. The only way this will reach the right people is to keep it away from the wrong people. Good luck to you sir with what you trying to do. I will spread the word and the plans and if I can get the finances I will set up production of kits for those that can't build from scratch and maybe build units for those that can't do it them selves. Those people must be given the chance to benefit too. I have already told several about this, but they think it is like all the others that you hear about and never see.
First things first I must design build (with you) a motor/generator capable of providing a house hold with all the power needed. Power for transportation is good too, but I think power for the home is first priority. I think that a cold motor and modified hot generator is easiest way to convert cold to be used in the home. You spoke of having designed both motors and generators so you probably already have that done. Just need scaled to purpose.

Regards
Larry